Table of Contents
Advertisement
Flowphant T DTT31, DTT35
It meets general safety standards and legal requirements. It also complies with the EU
directives listed in the device-specific EU Declaration of Conformity. .
2.6
IT security
Our warranty is valid only if the device is installed and used as described in the Operating
Instructions. The device is equipped with security mechanisms to protect it against any
inadvertent changes to the settings.
IT security measures, which provide additional protection for the device and associated data
transfer, must be implemented by the operators themselves in line with their security
standards.
3
Incoming acceptance and product identification
3.1
Incoming acceptance
Proceed as follows on receipt of the device:
1.
Check whether the packaging is intact.
2.
If damage is discovered:
Report all damage immediately to the manufacturer.
3.
Do not install damaged material, as the manufacturer cannot otherwise guarantee
compliance with the safety requirements and cannot be held responsible for the
consequences that may result.
4.
Compare the scope of delivery against the contents of your order.
5.
Remove all the packaging material used for transportation.
3.2
Product identification
The device can be identified in the following ways:
• Nameplate specifications
• Enter the serial number from the nameplate in the W@M Device Viewer
(www.endress.com/deviceviewer): all data relating to the device and an overview of the
Technical Documentation supplied with the device are displayed.
The nameplate illustrated below is designed to help users identify specific product
information, such as the serial number, design, variables, configuration and device approvals:
Endress+Hauser
Incoming acceptance and product identification
7
Advertisement
Table of Contents
