Upload And Download Sensor Dat; (Eeprom) - Endress+Hauser Liquicap M FTI51 Operating Instructions Manual

Liquicap M FTI51
Endress+Hauser
4 →
7
3
-
+
5
A0043661
7.2.12 Upload and download sensor DAT (EEPROM)
The customer-specific settings of the electronic insert (e.g. empty and full calibration,
switch-point adjustment) are stored automatically in the sensor DAT (EEPROM) and
the electronic insert.
The sensor DAT (EEPROM) is updated automatically each time a parameter is
changed in the electronic insert.
If replacing the electronic insert, all the data are transferred into the electronic insert
using a manual upload. No additional settings are required.
After installing the electronic insert, the manual download must be carried out to
transfer the customer-specific settings of the electronic insert.
Upload
An upload transfers the saved data from the sensor DAT (EEPROM) to the electronic
insert. The electronic insert does not have to be configured any more, and the device is
then operational.
Download
A download transfers the saved data from the electronic insert to the sensor DAT

(EEPROM).

Downloading the data
1 →
7
3
-
+
5
A0042483
5
7
3
-
+
5
A0042513
‣
The factory settings have been
successfully restored.
2 →
1 8
7
3
-
+
5
A0042507
‣
Set the function switch to
position 8.
Commissioning
3 →
7
3
-
+
5
> 2 s
A0042508
‣
Press the  key > 2 s.
57