Radius Overview - Planet Networking & Communication WGSW-24040 User Manual

4.11.7 RADIUS Overview

This page provides an overview of the status of the RADIUS servers configurable on the Authentication configuration page. The
RADIUS Authentication/Accounting Server Overview screen in
Figure 4-11-8 RADIUS Authentication/Accounting Server Overview page screenshot
The page includes the following fields:
RADIUS Authentication Servers
Object
 #
 IP Address
 State
Figure 4-11-8
Description
The RADIUS server number. Click to navigate to detailed statistics for this server.
The IP address and UDP port number (in <IP Address>:<UDP Port> notation) of
this server.
The current state of the server. This field takes one of the following values:
 Disabled: The server is disabled.
 Not Ready: The server is enabled, but IP communication is not yet up and
running.
 Ready: The server is enabled, IP communication is up and running, and
the RADIUS module is ready to accept access attempts.
 Dead (X seconds left): Access attempts were made to this server, but it
did not reply within the configured timeout. The server has temporarily
been disabled, but will get re-enabled when the dead-time expires. The
number of seconds left before this occurs is displayed in parentheses. This
state is only reachable when more than one server is enabled.
248
User's Manual of WGSW-24040 / WGSW-24040R
appears.