Table of Contents
Advertisement
DVIP
DVIP is an Ethernet-based protocol designed by Datavideo to connect a network of
Datavideo devices. DVIP Configuration Tool is a special network configuration software tool
designed for DVIP device search on the same network and configuring device network
settings such as Hostname, DHCP mode, IP address, subnet mask, gateway IP, and primary
and secondary DNS.
Depending on your operating system, download DVIP Configuration Tool from the
respective sites listed as follows:
PC: https://www.microsoft.com/en-us/p/dvip-network-
config/9p6gtz839k6s?activetab=pivot%3Aoverviewtab
Android:
https://play.google.com/store/apps/details?id=com.datavideo.dvipnetconfig&hl=en_US
iOS: https://itunes.apple.com/tw/app/dvip-network-config/id1177895983?mt=8
After you've installed the DVIP Network Configuration Tool, follow the steps outlined below
to scan for online DVIP devices and configure their corresponding settings.
Step 1: Open the DVIP Network Configuration Tool then select your PC or laptop's network
interface card from the drop-down menu as shown in the diagram below.
35
Advertisement
Table of Contents
