Table of Contents
Advertisement
RTC Settings
Date and time are retrieved from the RTC server. Click the Refresh button
current time.
System
On the system page, you will be allowed to modify the device name, perform a firmware
upgrade, change the login information and format the SD card.
The system page is shown in the diagram below.
Device Name
Enter a preferred name in the textbox then click the Apply button to save the change.
Account and Password
Enter preferred username and password in the admin and admin password textboxes
respectively. Click the Apply button to save the change.
To reset the login credentials to default username (admin) and password (admin), simply
click the Factory Default button.
Alternatively, see
9.5 Resetting Login Credentials
Disk Format
Before you start recording, you should format the SD card to either FAT32 or exFAT.
Comparison between exFAT and FAT32 is provided in the table below.
Best suited for small drives.
Maximum file size 4GB and partition size 8 TB.
FAT32 is an older type of file system introduced
in Windows 95.
Better compatibility
Note that you should only use Class 10 SD card or above. See
SD Cards
for a list of SD cards recommended by Datavideo.
FAT32
to reset using the stream control buttons.
Works well on large drives.
No limit on file size, and partition size.
exFAT replaces FAT32, and supports
cross-platform scenarios.
Not used often.
Appendix 4 Recommended
153
to update the
exFAT
Advertisement
Table of Contents
