Start/Stop Button; Resetting Login Credentials - Datavideo HS-4000 Instruction Manual

START/STOP Button

Lastly, after you've configured the operation mode, press and hold for at least 2 seconds to
enable/disable live streaming/recording.

9.5 Resetting Login Credentials

If you forget your username and/or password, follow the steps below to reset the web UI's
login credentials.
1. Press the stream control buttons in the following order:
Start/Stop  Bitrate  Res  Res  Mode  Mode  Mode
2. The Mode button will flash red/white colors for about 5 seconds.
3. The device will start resetting the login credentials.
4. Use admin/admin to log in next time.
165