Zoom; False Color - Datavideo HS-4000 Instruction Manual

First turn on the color bar, then turn on the single color mode in the check field as this
allows you to do the screen calibration by adjusting the brightness, contrast, saturation, tint
and sharpness.

Zoom

The zoom function allows you to enlarge the image by a certain percentage (10 – 40%).
Note: Zoom control is disabled if the scan mode is set to pixel to pixel.

False Color

Also known as the exposure assist, once enabled, the
false color feature will change colors of the elements of
the image based on the brightness value. This allows the
user to use the monitor's exposure function to achieve
proper exposure without the use of costly external
equipment.
To best utilize this feature, you must first understand the
color chart below. The color chart is like a color scale.
The exposure level is represented by different colors
which correspond to the respective luminance of the
pixels as displayed on the monitor. The correct exposure
ranges from 10 – 100%. Anything below 10% is regarded
as underexposed and if exposure exceeds 100%, it is
deemed overexposed.
Underexposure and overexposure will lead to loss of
details in an image.
139