Table of Contents
Advertisement
2. Tap Load Ani Logo.
On the page shown above, you should find a thumbnail view of three animated logos. Use the
right/left arrow buttons at the bottom of the page to browse all other animated logos which
are shown in numerical order. Blank thumbnails are unused memory slots.
To load an animated logo, simply select a logo buffer first then browse to an ani logo number
and lastly select 'Load'. The selected animated logo will be loaded into the selected buffer.
To adjust the animated logo position, simply change the X and Y values of the respective logo
buffer which can be found at the bottom of the Ani Logo menu.
Selecting "Clear Logo" clears the logo buffer. Selection of "Delete Logo" removes the
animated logo from the selected memory slot.
Importing Animated Logo from the PC
The Switcher Image Import/Export software (SwitcherImageImEx_vx.x.x.msi) allows the
user to import animated logos from the PC to a designated memory slot of the switcher. The
software installation package can be downloaded from the product page.
Note: Each animated logo consists of a series of 120 sequential files in bmp, jpg, png or pic
format. Every image file is limited to an aspect ratio of 480x270.
See
Chapter 4
for installation instructions and network configuration.
116
Advertisement
Table of Contents
