P-In-P - Datavideo HS-4000 Instruction Manual

 Left – Left sets the left edge of the keyer mask.
 Right – Right sets the right edge of the keyer mask.
 Top – Top sets the top edge of the keyer mask.
 Bottom – Bottom sets the bottom edge of the keyer mask.

5.4 P-In-P

The P-in-P menu allows the user to adjust various parameters for the PIP window. Use this
menu to configure your PIP window if P-in-P is selected in Keyer Control of the Keyer menu
for a particular keyer.
Note: The keyer image source can only be selected in Key Source of the Keyer menu and the
supported resolutions are 4K, 1080p and 1080i.
P-in-P
In P-in-P, the user will be allowed to select a keyer that has been set to the PIP window. Please
note that Keyers 1 – 4 are active for PIP configuration only if P-in-P is selected in the Keyer
menu for the respective keyer.
 Key 1
 Key 2
 Key 3
 Key 4
You may set all four keyers to PIP but only two PIP windows can be activated at the same time.
In Quality, select Fine to fine tune the position of the P-in-P window by adjusting X and Y
vales as well as the Size in Position sub menu. This feature allows you to move the P-in-P
window more precisely to the desired location and adjust its size.
75