Table of Contents
Advertisement
Aspect
The aspect control allows you to manually set the aspect ratio of the monitor. You should
choose the aspect ratio of your screen to match that of the input video in order to achieve
the best viewing experience. Views of different aspect ratios are shown in the diagram
below.
Note: Aspect ratio control is disabled if the scan mode is set to pixel to pixel.
Overscan
If enabled, the image rendered on the display will be larger than the physical area of the
screen, creating a cropped image on the monitor screen.
Check Field
The check field function offers the user Red-Only, Green-Only, Blue-Only and
Mono
modes
for screen calibration should you require them.
138
Advertisement
Table of Contents
