Table of Contents
Advertisement
SRT
Please note that the NVS-32/vMIX connection is bidirectional. Regardless of the caller-
listener setup, either end can be the camera video source.
Listener
Open the web UI and on the Encoder page, select SRT Listener from the Protocols drop-
down list of the encoder. Then enter the SRT port number 9000 in the SRT URL textbox.
Lastly click the Apply button to save the SRT settings and the Start button to activate the
stream.
On the PC or laptop where the vMIX is installed, open vMIX then click "Add Input" and select
"More".
On the Input Select window, click "Stream/SRT" then select "SRT Caller" from the "Stream
Type" drop-down list. After that, enter the following into the respective fields.
Hostname: IP address of the video source which is the NVS-32 in this case.
Port: 9000 (SRT port number ranges from 1024 to 65535.)
You can leave passphrase empty as it is not supported on the NVS-32.
Unlike RTMP(S), we will use vMIX to playback an SRT stream on
a PC. If your PC or laptop does not have vMIX installed, please
visit
https://www.vmix.com/
then install the program.
160
and download the installation file
Advertisement
Table of Contents
