Datavideo HS-4000 Instruction Manual page 24

10. TRANS PVW Button
Once enabled, you can then test the effect of a chosen MIX,
WIPE or Stinger transition on the Preview Monitor (See the
TRANS PVW Button section for detailed instructions).
11. T-Bar – Manual Transition
Move the T-Bar up or down to switch between Preview and
Program videos (See the
instructions).
12. CUT Button
A hard cut between video sources (See the
section for detailed instructions).
13. Auto Take
Press to trigger automatic transition (See the
section for detailed instructions).
14. FTB Button (Fade to Black)
Fades the program view to black once pressed (See the
Button section for detailed instructions).
Keyers
15. Keyer Selection
Enabling the pre-assigned keyers (Chroma,
Luma, Linear, DSK and PIP) on Program and
Preview views.
Note: See
detailed descriptions of various keyer
functions.
Logo
16. Logos 1 & 2
Logo insertion on preview and program outputs
once enabled.
Note: Logos will not be transitioned as the CUT
or AUTO button is pressed, nor will it be
transitioned as the T-bar is pushed. See
Section 6.4 Enabling Still Logo
Enabling Logo Animation
descriptions of the logo function.
24
T-Bar section for detailed
CUT Button
Chapter 7 Advanced Operation
and
for detailed
AUTO Button
FTB
for
Section 6.5