Status Pane - Datavideo HS-4000 Instruction Manual

Status Pane

The status pane is described below.
Start/Stop button
Operation Modes
• STM + REC
• STM Only
• REC Only
The NVS-32 offers the following operation modes:
 STM + REC: Streaming encoder and recorder are enabled at the same time.
 STM Only: Only streaming encoder is enabled.
 REC Only: Only recorder is enabled.
which can be selected from the drop-down list shown above. Regardless of the mode
selected, you will be allowed to customize stream and record settings.
The streaming encoder settings consist of
(mbps), Bitrate Control,
Two streaming protocols are offered and they are
details.
The recorder settings are simply
Click the "Start" button to start operating in the selected mode. Click the "Stop" button to
end device operation.
Note: The status indicators should be turned on after the device starts operating in the
selected mode. A flashing indicator indicates that device is initializing. A solid color
indicator means that the device is functioning well. You should check the device for errors
if the indicator flashes three times then turned off. The error code and the suggested
solution will be shown in the Message box on the
You can also select the UI language. The currently available languages are English,
Traditional Chinese, and Simplified Chinese.
The input video resolution is also shown, however, the NVS-32 web UI does not update itself
so to learn the latest device status, please refresh the page manually on a regular basis.
Recorder
status indicator
Encoder
Encoder status with
the streaming
protocols shown
Encoding
Key Frame Interval and the Protocol.
Encoding Format,
146
Select the UI language:
• English
• Traditional Chinese
• Simplified Chinese
Input video Refresh
resolution button
Format, Resolution,
RTMP and SRT. See Section 9.3
Resolution and Video Bitrate
Information pane.
Logout button
Video Bitrate
for
(mbps).