Table of Contents
Advertisement
Main
Sub
Clear Ani
Logo
Delete Ani
Logo
Logo 1
Logo 2
Standard
Genlock
Note: Genlock is currently unavailable and will be added in future firmware upgrades.
Keyboard
Auto Save
Setup
Factory Def
Language
Network
Software
The following sub-sections will show you various options available in the menu.
Ani Logo Memory
Location
Load Button
Clear
Ani Logo Memory
Location
Delete Button
X
Y
X
Y
Resolution
Level
On/Off
H Phase
V Phase
Brightness
ON / OFF
Factory Default
Reset Input Names
English
Traditional Chinese
Simplified Chinese
DHCP
IP Address
Network Mask
Software
App Version
SW Version
Firmware
OS Version
61
Options and Parameters
Memory locations from 0 to 999
Loads the selected ani logo
Clear the loaded ani logo
Memory locations from 0 to 999
Remove animated logo from a memory location
X coordinate from -50 to +50
Y coordinate from -50 to +50
X coordinate from -50 to +50
Y coordinate from -50 to +50
3840x2160p60/59.94/50/
30/29.97/25
1080p60/59.94/50/
30/29.97/25
Save Button
Audio Standards
EBU
SMPTE
AUTO (Default)
Default: Off
-2190 – 2190 ms (Default: 0)
-1124 – 1124 ms (Default: 0)
1 – 7
Automatically saves the last settings before the
machine is shut down; once turned ON auto
save also occurs upon every Still Load.
Factory Default Reset loads the default
configuration from memory point 0 for all
configuration options except for the Setup.
Resets the Multiviewer labels to the default
settings
On/Off (Default: Off)
192.168.100.101 (Default)
255.255.255.0 (Default)
Tap Upgrade to start the FW upgrade process
See the
Firmware Upgrade
firmware update process.
Display of version numbers only
Resolution
Selection
Saves the selected
resolution
section for the USB
Advertisement
Table of Contents
