Table of Contents
Advertisement
To import still logo image files from your PC, click "Logo" then enter a memory location.
Click "Import Logo" to browse your hard drive and select the logo image file that you would
like to import.
See section 5.8, Logo, and section 6.4,
Enabling Still
Logo, for more details.
4.6 Ani-Logo
Click the Ani-Logo button to view all the animated logos saved on the switcher.
To import animated logo files from your PC, click "Ani-Logo" then enter a memory location.
Click "Import Ani-Logo" to browse your hard drive and select the animated logo that you
would like to import.
See section 5.8, Ani-Logo, and section 6.5,
Enabling Logo
Animation, for more details.
4.7 Setup
On the Setup page, you will be able to view the software version, network connect status,
firmware version installed and the available space on the switcher.
The Setup page allows you to reset the software to its defaults, and change the interface
language. The available languages are English, Traditional Chinese, and Simplified Chinese.
Click Save Setup to apply the new settings.
The Target IP Address is the IP address of the switcher that you would like to connect. Enter
the IP then click SCAN to connect to the switcher.
52
Advertisement
Table of Contents
