Datavideo HS-4000 Instruction Manual page 55

Main Sub
Border
Position
Keyer
Keyer Ctrl
Keyer
Key Source
Soft
Width
Luma
Sat
Hue
X
Y
Key 1
Key 2
Key 3
Key 4
DSK 1
DSK 2
Fine / Normal
Linear
Luma
Mode
Chroma
Full
Self
Source
Split
Mode
P-in-P
Opac
Lift
Gain
Invert
Key Source
Fill Source
55
Options and Parameters
Border Softness (0 - 100% Default: 0%)
Border Width (0 - 100% Default: 0%)
Border Color Luma (0 - 100% Default: 0%)
Border Color Saturation (0 - 100% Default: 0%)
Border Color Hue (0 - 359 Default: 0)
Horizontal Position (-100 - 100% Default: 0%)
Vertical Position (-100 - 100% Default: 0%)
Keyer Selection (Default: Key 1)
Fine: High keying quality
Normal: Original keying quality
Type of Keyer (Default: Linear)
Self: One input keyer (Default)
Split: Dual input keyer
P-in-P: Apply the keying effect to the PIP
window.
Parameter for transparency of the overall
foreground key image, ranging from 0% to
100% (Default: 0%).
Parameter for dark/black areas of the overall
foreground key image, ranging from -100% to
+100% (Default: 0%).
Parameter for light/white areas of the overall
foreground key image, ranging from 0 to 16.8
(Default: 0).
OFF: Luma key removes black background by
default
ON: Luma key removes white background after
INVERT is turned ON.
Select key source from the list below:
Bars
Matte
Input 1
Input 2
Input 3
Input 4
Input 5
Input 6
Input 7
Input 8
Black (Default)
Select fill source from the list below:
Bars
Matte
Input 1