Table of Contents
Advertisement
Main
Sub
Shade Matte
Input
Inputs
Proc Amp
Circle Shaded
Rounded
Rounded Shaded
Luma
Sat
Hue
Width
Soft
Opac
Direction
Luma
Sat
Hue
Shade Soft
Shade Pos
Source
Mode
Type
Mode
(Note: This option is
currently disabled
and will be available
in future firmware
upgrades.)
Black
White
Chrom
58
Options and Parameters
PIP Border Luma (0 - 100% Default: 0%)
PIP Border Color Saturation (0 - 100% Default:
0%)
PIP Border Color Hue (0 - 359 Default: 0)
PIP Border Width (0 - 100% Default: 0%)
Distinctiveness of Border Edge (0 - 100%
Default: 0%)
Border transparency (0 - 100% Default: 0%)
Direction of light source (0 - 359 Default: 0).
Shade Matte Luma (0 - 100% Default: 0%).
Shade Matte Saturation (0 - 100% Default: 0%).
Shade Matte Color (0 - 359 Default: 0).
This blurs or softens the Shade Matte area (0 -
100% Default: 0%).
Sets position of the boundary line between
Shade Matte and Border Matte (0 - 100%
Default: 0%).
Selection of an input to set the mode (Default:
Input 1).
Input 1 - 8
Three input modes are Live, Freeze, and Still
(Default is Live).
Channels 3, 4, 7 and 8 are
SDI/HDMI shared input
HDMI
channels, Depending on the
SDI
physical connections at the
Auto
rear, select the input
interface accordingly.
OFF
Mode disabled
Enables the CG mode
Note: This option is only
available on HDMI inputs
CG Md
(HDMI 9 (CH3), 10 (CH4), 11
(CH7) and 12 (CH8)) so select
HDMI in Type after selecting
input 3, 4, 7 or 8.
Zoom: Enlarges or shrinks the
selected input image
horizontally and vertically at
the same time.
X: Enlarges or shrinks the
Zoom Md
selected input image
horizontally.
Y: Enlarges or shrinks the
selected input image
vertically.
Black level (0 - 100% Default: 0%)
White level (0 - 100% Default: 0%)
Chroma level (0.0 - 16.0 Default: 0)
Advertisement
Table of Contents
