Table of Contents
Advertisement
Video Bitrate
Network
The network page allows the user to choose to use DHCP or Static IP to connect. You can
also view the current time retrieved from an RTC server on this page.
DHCP Enable/Disable
Enable DHCP to connect to a DHCP server which should assign an IP address to your device.
To use a static IP address, simply disable DHCP then enter your network connection settings
which include the IP address, network mask, gateway IP and DNS information.
The device's MAC address is shown but cannot be modified.
Please note that the NVS-32 uses DHCP to connect by default. Click the Reset IP button to
restore default network settings and the Apply button to save.
The bitrate of the video specifies the amount of information
stored in the video. The higher the bitrate is, the clearer the
video is.
152
Advertisement
Table of Contents
