Caller - Datavideo HS-4000 Instruction Manual

Click the "OK" button to start streaming to vMIX from NVS-32 via SRT.

Caller

Open the web UI and on the Encoder page, select SRT Caller from the Protocols drop-down
list of the encoder. Then enter the SRT port number 9000 in the SRT URL textbox and the IP
address of the destination device in the Caller IP/URL textbox. You can also enter a stream
ID but it is entirely optional. Lastly click the Apply button to save the SRT settings and the
Start button to activate the stream.
On the PC or laptop where the vMIX is installed, open vMIX then click "Add Input" and select
"More".
161