Delete Ani Logo; Positioning; Setup; Standard - Datavideo HS-4000 Instruction Manual

Delete Ani Logo

First move to a memory location, then select "Delete" to remove the animated logo from the
selected memory location.

Positioning

The animated logo can be manually positioned by adjusting its XY coordinates. Note that the
origin of the coordinate system is at the center of the screen.
X: A positive value indicates that the animated logo is in the right half of the screen and a
negative value indicates that the animated logo is in the left half of the screen.
Y: A positive value indicates that the animated logo is in the top half of the screen and a
negative value indicates that the animated logo is in the bottom half of the screen.

5.9 Setup

In the "Setup" menu, the user can change the resolution, reset the HS-4000 to its Factory
Default values, enable/disable Auto Save, choose the preferred menu language, upgrade
firmware and view the current firmware versions (Interface, Mainboard and Keyboard).

Standard

This option allows the user to choose the appropriate output resolution. Once done, simply
select "Save" to confirm the selected output resolution. The available resolutions are
4K/60/59.94/50/30/29.97/25 and 1080p/60/59.94/50/30/29.97/25.
Note: If you've selected 1080p for the output resolution, all inputs should have a resolution
of 1080p as well.
100