Logo; Animation - Datavideo KMU-300 Instruction Manual

Logo

You can also add a logo to the video. You will be required to select a jpg, jpeg, bmp, png or gif file
from your local hard disk. Click Select to browse the hard drive for your logo file then click Update to
start the upload.
After the logo file has been successfully uploaded, you can adjust the size by entering appropriate
values in the Width and Height fields.
The Effect drop-down list sets how the logo enters the video. If you want the logo to enter from
either side of the screen, select "Left to Right" or "Right to Left". Select "Cut in" if you want the logo
to appear with no effect. Lastly, set the coordinates of the logo. The position of the logo on the
screen will be shown in the location box.
To enable the logo, simply click the Logo ON button which can be found at the bottom of the page.

Animation

You can also add an animation to the video. You will be required to select a jpg, jpeg, bmp, png or
gif file from your local hard disk. Click Select to browse the hard drive for your animation file then
click Update to start the upload.
After the animation file has been successfully uploaded, you can adjust the size by entering
appropriate values in the Width and Height fields.
44