Power Tilt Switch (Outboard Motor Pan); Manual Relief Valve - HONDA marine BF350A Owner's Manual

Power Tilt Switch (Outboard
Motor Pan)
POWER TILT SWITCH
When you are away from the
power trim/tilt switch on the
gearshift/throttle control lever,
you can operate the power tilt
switch on the outboard motor.
The switch operation is the same
as that of the power trim/tilt
switch on the gearshift/throttle
control lever.
CAUTION
Do not operate the power tilt
switch on the outboard motor
while cruising. You can lose
control of your balance, fall,
and be injured by the moving
outboard, propeller, or boat.
Always use the power trim/tilt
switch while under way.
NOTICE
• Do not attempt to use the
power tilt switch to tilt the
outboard motor down while
the tilt lock levers are in the
LOCK position. Damage to
the power tilt system may
occur.
OPERATION

Manual Relief Valve

MANUAL RELIEF VALVE
POWER MANUAL
(To hold)
(To release)
The outboard motor can also be
tilted manually after opening the
manual relief valve. This feature
enables the outboard motor to
be tilted up or down when no
battery is connected.
For manual tilting, use a
screwdriver to turn the valve
counterclockwise 1 or 2 turns.
Close the valve firmly after
positioning the engine.
83