Table of Contents
Advertisement
OPERATION
68°
12°
0°
TILT
ANGLE
– 4°
15°
0°
(VERTICAL LINE)
TRIM ANGLE
(when transom angle is 12°)
78
MOORING, BEACHING,
LAUNCHING
Stop the engine before tilting the
outboard motor.
Before tilting an outboard motor
up, leave it in the running
position for one minute after
stopping the engine to drain the
water from inside the engine.
1. Move the gearshift/throttle
control lever to the NEUTRAL
position and stop the engine.
2. Press UP on the power trim/
tilt switch and tilt the
outboard motor to the best
position according to cruising
conditions.
Pressing UP on the power trim/
tilt switch on the gearshift/
throttle control lever or PTT
switch panel twice in succession
tilts up the outboard motor to
the set tilt angle automatically.
Flush-Mount Type
GEARSHIFT/THROTTLE
CONTROL LEVER
POWER TRIM/TILT SWITCH
Advertisement
Table of Contents
