Trimming The Outboard Motor - HONDA marine BF115J Owner's Manual

Trimming the Outboard Motor

68°
0°
TILT ANGLE
– 4°
16°
0°
(VERTICAL LINE)
TRIM ANGLE
(when transom angle is 12°)
For multiple outboard motors, the
trim/tilt angle of all outboard motors
is adjusted at the same time by using
the power trim/tilt switch on the
remote control lever and the trim/tilt
angle of each outboard motor is
adjusted by using each power trim/tilt
switch on the panel.
(D1 type)
POWER
TRIM/TILT
SWITCH
Press UP to
raise bow
Press DN to
lower bow.
12°
(D2 type)
SINGLE TYPE
REMOTE
CONTROL
LEVER
POWER
TRIM/TILT
SWITCH
Press UP to
raise bow
Press DN to
lower bow.
DUAL TYPE
POWER
TRIM/TILT
SWITCH
Press UP to
raise bow
Press DN to
lower bow.
OPERATION
REMOTE
CONTROL
LEVER
REMOTE
CONTROL
LEVERS
95