Nmea Interface Coupler; Operating Hour Notification System - HONDA marine BF115J Owner's Manual

CONTROLS AND FEATURES

NMEA Interface Coupler

®
The NMEA2000 interface coupler
can provide information regarding
engine speed, fuel consumption, and
various warnings to an existing
NMEA2000 network via an optional
interface cable. Contact your dealer
for more information.
NMEA INTERFACE COUPLER
50
Operating Hour Notification
System
This outboard motor engine counts
the number of operating hours since
the last periodic maintenance. When
the next periodic maintenance is due,
the engine notifies the NMEA2000
network, and a maintenance
indication is displayed on an
NMEA2000-compatible device.
After periodic maintenance is
performed, reset the hour counter by:
DBW type:
1. Turning ON the power switch or
ignition switch. (The buzzer will
sound twice.)
• Wait at least 1 second.
2. With the control lever of the
outboard motor, shifting to the "F"
(forward) or "R" (reverse) gear.
3. Turning OFF the power switch or
ignition switch.
4. Turning ON the power switch or
ignition switch. (The buzzer will
sound twice.)
5. Inserting and removing the
emergency stop switch clip five
times within 20 seconds.
• When reset, the buzzer will
sound once.
Mechanical wire type:
1. Stopping the engine.
2. Setting the gearshift at F or R.
3. Turning the ignition switch ON.
The buzzer will sound once.
4. Pressing the emergency stop switch
5 times within 20 seconds.
When using the control panel
without indicators type, within
20 seconds, pull and insert the
emergency stop switch clip, or
remove the clip and pull the
emergency stop switch 5 times.
The buzzer will sound once when
the hour counter is reset.