OPERATION
CRUISE CONTROL MODE
CRUISE/UP SWITCH
TROLL/DN SWITCH
TROLL/DN Switch: Reduce engine
speed or velocity
CRUISE/UP Switch: Increase
engine speed or velocity
76
If you press the CRUISE/UP switch
during cruising with all the
gearshift/throttle control levers in
the FORWARD position, the
mode changes to the cruise
control mode, which lets the boat
cruise at a constant engine speed
or velocity.
A long buzz sounds once.
Speed can only be adjusted in
●
cruise control mode when
equipped with GPS.
You can adjust the engine speed
or velocity by every time you
press the switch once. You will
hear a short buzz.
Continuing to press the switch
will not decrease or increase the
engine speed beyond the lower
or higher limit.
If you try to do this, a short buzz
sounds twice.
Engine speed adjusting range:
Engine speed at mode change
±500 rpm (in steps of 50 rpm)
Velocity adjusting range:
− Velocity at mode change ±10
km/h (in steps of 1.0 km/h)
− Velocity at mode change ±5
miles/h (in steps of 0.5
miles/h)
− Velocity at mode change ±5
knots (in steps of 0.5 knots)
The cruise control mode is
released forcibly in the following
cases.
GPS error or disconnection
●
(Velocity adjustment is
selected in the multifunction
display)
Operate the gearshift/throttle
●
control lever a certain amount
from the position for
changing modes