Table of Contents
Advertisement
TROUBLESHOOTING
Emergency Gear Shifting (for DBW type)
If the gear cannot be shifted, perform shift operation manually according to the following procedures and return to port
at possible engine speed.
1. Set the remote control lever in the NEUTRAL position (see page 22-23).
2. Stop the engine (see page 112).
3. Remove the engine cover (see page 60).
4. Shift gear into neutral by inserting the Phillips screwdriver with the grip of the tool kit (see page 120) into the hole of
the shift pivot and moving the shaft.
Grasp the shaft closer to the shift pivot of the inserted Phillips screwdriver.
Operate in a stable posture that makes it easy to apply force.
SHIFT PIVOT
HOLE
PHILLIPS
GRIP
SCREWDRIVER
5. Start the engine (see page 70).
6. Shift gear into "F" (Forward) or "R" (Reverse) by moving the shift pivot with the Phillips screwdriver with the grip of
the tool kit.
After returning to port, stop the engine and anchor the boat.
150
NEUTRAL
REVERSE
FORWARD
NEUTRAL position:
FORWARD position:
REVERSE position:
Advertisement
Table of Contents
