M.2 Drive Replacement - Lenovo ThinkSystem SD530 V3 User Manual

Figure 55. E3.S drive cage cover installation
After this task is completed
If the server is configured for RAID operation through a ThinkSystem RAID adapter, you might have to
reconfigure your disk arrays after you install drives. See the ThinkSystem RAID adapter documentation for
additional information about RAID operation and complete instructions for using ThinkSystem RAID adapter.

M.2 drive replacement

Follow instructions in this section to remove or install an M.2 drive.
Remove an M.2 drive
Follow instructions in this section to remove an M.2 drive.
About this task
To avoid potential danger, make sure to read and follow the safety information.
Attention: Read "Installation Guidelines" on page 41
sure that you work safely.
Procedure
Step 1. Make preparations for this task.
a. Power off the node (see
from the node.
ThinkSystem SD530 V3 User Guide
100
and "Safety inspection checklist" on page 42
"Power off the node" on page 51); then, disconnect all external cables
to make