Table of Contents
Advertisement
Figure 95. Thermal grease application with processor in shipping tray
Step 4.
Assemble the processor and heat sink.
a.
Align the triangular mark on the heat sink label with the triangular mark on the processor carrier
and processor.
b.
Install the heat sink onto the processor-carrier.
c.
Press the carrier into place until the clips at all four corners engage.
d.
Visually inspect to make sure that there is no gap between the processor carrier and the heat
sink.
ThinkSystem SD530 V3 User Guide
142
Advertisement
Table of Contents
Troubleshooting
