Lenovo ThinkSystem SD530 V3 User Manual page 127

Figure 71. Removal of the PCIe riser assembly
Step 3. If necessary, disconnect all the PCIe riser cables from the system board (see
routing" on page
After this task is completed
1. To replace a PCIe adapter, see
page 119.
2. If necessary, replace or remove the PCIe riser card from the riser cage.
177); then, lay the PCIe riser assembly on a flat, static-protective surface.
"Remove a PCIe adapter" on page 118
"PCIe riser cable
and "Install a PCIe adapter" on
.
Chapter 5 Hardware replacement procedures
117