Lenovo ThinkSystem SD530 V3 User Manual page 128

Figure 72. Replacement of the PCIe riser card
3. Install a replacement unit or filler (see
4. If you are instructed to return the component or optional device, follow all packaging instructions, and
use any packaging materials for shipping that are supplied to you.
Remove a PCIe adapter
Follow instructions in this section to remove a PCIe adapter.
About this task
To avoid potential danger, make sure to read and follow the safety information.
Attention: Read "Installation Guidelines" on page 41
sure that you work safely.
Note: Depending on the specific configuration, the hardware might look slightly different from the
illustrations in this section.
Procedure
Step 1. Make preparations for this task.
a. Power off the node (see
from the node.
b. Remove the node from the chassis (see
carefully lay the node on a flat, static-protective surface, orienting the node with the front
toward you.
ThinkSystem SD530 V3 User Guide
118
"Install a PCIe riser assembly" on page
and "Safety inspection checklist" on page 42
"Power off the node" on page
"Remove a node from the chassis" on page
121).
51); then, disconnect all external cables
to make
72); then,