Running And Viewing Diagnostic Tests; Perform Instrument Diagnostic Tests - Agilent Technologies Magnis NGS Prep System User Manual

Running and Viewing Diagnostic Tests

Perform instrument diagnostic tests

Diagnostic tests verify that individual components of the instrument are functioning as intended.
1 Before you start, make sure that the tube holder lids are closed and all tip boxes, strip tubes,
and plates have been removed from the deck.
2 From the Home screen, press Settings.
The
3 Press Self Diagnostic.
The
4 Press Run Diagnostic Test.
The
Figure 20 Diagnostic Test screen
5 Mark the tests that you want to perform. To perform all tests, mark All Tests.
Scroll down to see all tests in the list.
6 Press Run.
The system performs the selected tests.
Some tests may prompt you to perform specific actions. Follow the instructions on the
touchscreen.
When all tests are completed, the
Magnis and Magnis Dx NGS Prep System User Guide
Settings screen opens.
Instrument Diagnostic screen
Diagnostic Test screen
opens.
opens, listing all of the available diagnostic tests.
Diagnostic Test Report screen opens.
38