Configuration Option Tables; Overview; Related Documentation; Configuration Option Tables Format - Paradyne COMSPHERE
3610 User Manual

Configuration Option Tables

Overview

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Related Documentation

Configuration Option Tables

Configuration Option Tables Format

Overview
After the DSU and any options are installed, set the
software configuration options by accessing the
Configuration (Confg) branch of the menu. Refer to the
menu tree in Appendix A and the worksheet in
Appendix B while planning configurations.
TOP-LEVEL MENU
Local Remot
Address
Stat Bckup
Load and save a set of factory defaults before
changing any configuration options. Refer to the Saving
and Changing Configuration Options section in
Chapter 2. For additional information, refer to:
Table 2-1, Default Configuration Option Sets.
Table E-4, Configuration Error Messages, for
messages that may appear after pressing SAVE.
Related Documentation
Configuration options supporting TDM, MCMP, and
digital bridging are in Document No. 3610-A2-GB48.
Configuration options supporting DBMs are in
Document No. 3610-A2-GB49.
3610-A2-GB46-60
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Msgs
Test Confg Ctrl
495-12970b
Configuration Option Tables
This section contains a configuration option table for
each functional group or option set within the
Configuration (Confg) branch of the menu that is specific
to DSU and LPDA-2 applications.
Each table lists all the configuration options available
in the option set. The tables are in the order in which they
appear on the Confg branch of the menu.
DSU Configuration Options (Table 4-1)
Diagnostic DSU Configuration Options (Table 4-2)
Diagnostic General Configuration Options
(Table 4-3)
General Configuration Options (Table 4-4)
LPDA-2 Configuration Options (Table 4-5)
Factory default option sets for the tables listed above
are located in Table A-1. Configuration options appear or
are filtered based on settings in effect and additional
installed hardware features.
Configuration Option Tables Format
The tables show the following configuration option
information:
Name of the configuration option followed by a
colon (: ) and the factory default setting for FacT
(tributary).
All selectable options.
Description of the configuration option.
Description of each selectable setting.
December 1996
4
4-1
4-1
4-1
4-1
4-1