Paradyne COMSPHERE
3610 User Manual page 67

Date:_______________________________________________
Device:_____________________________________________
Serial Number:_______________________________________
DSU
Configuration Options
Rate(Kbps) Auto, 64CC, 64L, 56, 38.4, 19.2,
9.6, 4.8, 2.4
64, 56, 48, 38.4, 32, 28.8, 24.0, 19.2,
PrtSp(Kbps)
18.8, 18.0, 16.8, 14.4, 12.0, 9.6, 9.2,
8.4, 7.2, 4.8, 4.4, 4.0, 2.4 , 2.0, 1.2,
Disab
TxClkSource Int, RXC, Ext, DDS, Prt1, Prt2, Prt3,
Prt4, Prt5, Prt6
Msg Clamp Enab, Disab
TxElasStor Enab, Disab
RxElasStor Enab, Disab
+ 6, 0, –10
19.2 PowrLvl
64KScramblng On, Off
On, Off
64KLatchLpbk
NetIntf AggSw, Forc, Disab
Net ITiming Int, NetI, Prt1, Prt2, Prt3, Prt4, Prt5,
Prt6
V.54 Lpbk Enab, Disab
Diagnostic DSU
Configuration Options
Diag Type NonD, Disr, Mixed, None
2nd Ch(bps) 100, 400, 800, 1200, 1600
Disr Type 2500, 2600, 3600s, 3600e, Br56
Diagnostic General
Configuration Options
Position Cntrl, Trib, G2Trb
LinkConfg Pt-Pt, M-Pt
Resp Period 1, 2, 10
TribTimOut sec to
Diag Conn CC, DC
Link Delay 0s, 1s, 2s, 5s, 10s, 20s, 50s
Network Delay 0s, 1s, 2s, 5s, 10s, 20s, 50s
0s, 1s 2s, 5s
Packet Delay
,
Extend Chan Yes, No
Upstrm Port Prt1, Prt2, Prt3, Prt4, Prt5, Prt6
M-PtSymPrt Enab, Disab
Fast Sel Enab, Disab
Configuration Worksheet for Basic DSU Mode
Location:____________________________________________
Local Address:________________________________________
Tributary Network Address:______________________________
General
Value
Configuration
Options
DTE Port
RTS Cntrl
CTS Cntrl
AntiStream
LSD Lead
CTS Lead
DSR FrcOn
SystemStat
DSR on Tst
Circ Assur
Tst Pattern
RespondRDL
LL by DTE
RL by DTE
Bilat Lpbk
Ext Leads
CCN by EL
DTR Alarm
Value
SW Vers
AnswExtBU
Async Sync
AsyncBit/Char
Stop Bits
Overspeed
Value
PowerOnTst
min (5 sec to 10 min)
LPDA-2
Configuration Options
LPDA-2
LPDA Address
SNA Backup
Code 1
Code 2
Value
EIA232, V.35
FrcOn, DTE
Std, = RTS
Disab, 1 – 100 sec (async term = 0 –100)
Std, Delay, FrcOn
Std, Delay, FrcOn
Enab, Disab
Enab, Disab
Enab, Disab
Enab, Disab
AT&T, Std
Enab, Disab
Enab, Disab
Enab, Disab
Enab, Disab
ExtLd, Rate, RPowr
Enab, Disab
Enab, Disab
3.24, 4.43, 6.66, Normal
Enab, Disab
Enab, Disab
6, 7, 8, 9, 10
1, 2
1.0, 2.3
Enab, Disab
Value
Enab, Disab
(1 – 256)
Enab, Disab
(6 digits)
(7 digits)
Local Phone Number: ( )________________________
DBM Installed
SNA Diagnostic Interface (LPDA-2) Enabled
ChgMd
Configuration Options
Protocol Mode DPII, ADp
S1 Hardware
Settings
DBM Interface Permissive (ON), Programmable (OFF)
Frame Ground/ Connected (ON), Disconnected (OFF)
Signal Ground
EIA-232 Test Mode Enable (ON), Disable (OFF)
V.35 Test Mode Enable (ON), Disable (OFF)
When the Async Sync configuration option is
enabled using the General branch, the following
PrtSp(Kbps) settings do not appear:
32, 24.0, 18.8, 18.0, 9.2, 8.4, 4.4, 4.0, and 2.0 kbps
19.2 Power Level defaults to +6 dB when
App Module ID displays XLOOP
V.32 Analog DBM only
Configuration options that do not appear when
Full mode is disabled using Menu from the
Configuration branch.
Value
Value