Firmware Version Control
Firmware Version Control
The DSU firmware version is reported to an NMS. To
ensure NMS compatibility when the control and tributary
have different firmware versions, the firmware version
can be modified.
To determine the current firmware version, use the
Health and Status Identity (ID) display. Refer to the
Identity section of Chapter 3 and Table 3-2. When the
control DSU firmware version is less than 7.24 but
greater than 1.10, changes are required to the DSU
tributary firmware version.
3610-A2-GB46-60
Firmware Version Control
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
December 1996
Information
To modify the control or tributary DSU firmware
version, use the SW Vers configuration option in General
Configuration Options, Table 4-4. Refer to the Firmware
Version Control, Table G-1, for software versions.
G
G-1
G-1