Paradyne COMSPHERE
3610 User Manual page 91

Specifications
APPLICATION
COMMUNICATION LINE
DATA RATES
Digital Services (DDS, ASDS)
LADS
1
Clear Channel
When timing is external (provided by the
DTE), the DTE's clock must be within these
ranges.
DDS NETWORK INTERFACE
3610 DSU
3611 DSU
DIAGNOSTIC INTERFACE
3610 DSU
3611 DSU
NETWORK COMPATIBILITY
ANSI T1.410 – 1992 and
AT&T Technical Reference 62310 – 1993
Integrated Network Corporation
Compatibility Bulletin CB-INC-101 and
Pacific Bell publications
PUB L-780035-PB/NB and
PUB L-780036-PB/NB
DSU COMPATIBILITY
Primary Channel
Diagnostic Channel
Point-to-Point or Multipoint:
Point-to-Point Only:
1
If a 3600 Series DSU is not used on both ends of the circuit or if the scrambler configuration option (64KScrambling) is
not enabled, the customer's DTE must provide for the primary data's ones (1s) density.
3610-A2-GB46-60
Table F-4
DSU Technical Specifications
Full- or half-duplex data transmission via point-to-point or multipoint DDS
network, or local area data channel
Leased or private 4-wire DDS line
2.4, 4.8, 9.6, 19.2, 38.4, 56, and 64CC kbps
2.4, 4.8, 9.6, 19.2, 38.4, 56, and 64 kbps
64 kbps (on a 72 kbps circuit) with the 64KScrambling configuration option
enabled
64CC kbps 11 bps
56 kbps 9 bps
38.4 kbps 4 bps
19.2 kbps 5 bps
9.6 kbps 1 bps
4.8 kbps 0 bps
2.4 kbps 0 bps
8-pin modular jack, USOC RJ48S
(One or two) 50-pin connector, USOC RJ48T
Requires 3600 Series Hubbing Device which provides two 8-pin modular
jacks
Via the SDU in the COMSPHERE 3000 Series Carrier or DC-OUT via NMS
adapter cable (for a tributary in the carrier)
2.4, 4.8, 9.6, 19.2, 38.4, 56, and 64 kbps meeting the desired loss loop
19.2 kbps loop at levels of +6 dBm
All Paradyne digital products and other products that are compliant with
AT&T Technical Reference 62310 – 1987
3600 Series — enhanced 3600 diagnostics (nondisruptive or disruptive)
3500 Series — 2600 diagnostics
2600 Series — 2600 diagnostics
2500 Series — 2500 loopbacks
December 1996
Technical Specifications
Criteria
F-5