Paradyne 7123 User Manual page 77

Table 5-4.
7123-A2-GB20-00
Device Messages (2 of 4)
Message What It Indicates
Invalid date and/or A non-valid date or time
time was entered on the System
Information screen. The
date does not exist
(e.g., February 30th).
Invalid time: must be A non-valid system time
hh:mm:ss was entered on the System
Information screen.
Invalid – Already A test was already in
Active progress when it was
selected.
Invalid Password Login is required and an
incorrect password was
entered; access is denied.
Invalid Test A conflicting loopback or
Combination pattern test was in progress
when Start was selected to
start another test, or was
active on the same or
another interface when
Start was selected.
Limit of six Login IDs An attempt to enter a new
reached login ID was made, and the
limit of six login/password
combinations has been
reached.
No Security Records Delete was selected from
to Delete the Administer Login
screen, and no security
records had been defined.
Password Matching Password entered in the
Error – Re-enter Re-enter Password field of
Password the Administer Logins
screen does not match what
was entered in the
Password field.
September 2001
5. Operation and Maintenance
What To Do
Reenter the date in the
month/day/4-digit year format
and/or time in the
hour:minutes:seconds format.
Reenter the time in the
hour:minutes:seconds format.
No action is needed.
T
Try again.
T
Contact your system
administrator to verify your
password.
T
Wait until other test ends and
message clears.
T
Cancel all tests from the Test
screen (Path: main/test).
T
Stop the test from the same
screen the test was started
from.
T
Delete another login/password
combination.
T
Reenter the new login ID.
T
No action is needed.
T
Enter a security record.
T
Try again.
T
Contact your system
administrator to verify your
password.
5-7