Paradyne 7123 User Manual page 49

Configuring SNMP Traps
Select SNMP Traps from the Management and Communication menu to configure
SNMP traps when a trap is generated (see
T
Table 3-8.
7123-A2-GB20-00
Main Menu Configuration
SNMP Traps
See Appendix B, SNMP MIBs and Traps
trap features.
SNMP Traps Options (1 of 3)
SNMP Traps
Possible Settings: Enable, Disable
Default Setting: Disable
Determines whether the DSU/CSU sends trap messages to the currently configured
SNMP trap manager(s).
Enable – Sends trap messages.
Disable – Does not send trap messages.
Number of Trap Managers
Possible Settings: 1 – 6
Default Setting: 1
Specifies the number of SNMP management systems that will receive SNMP trap
messages from the DSU/CSU. An NMS IP Address must be configured in the NMS n IP
Address configuration option for each trap manager to receive trap messages.
1 – 6 – Specifies the number of trap managers.
NMS n IP Address
Possible Settings: 001.000.000.000 – 223.255.255.255, Clear
Default Setting: Clear (000.000.000.000)
Specifies the IP address that identifies the SNMP manager(s) to receive SNMP traps.
Display Conditions – This option appears for each trap manager specified in the
Number of Trap Managers configuration option.
001.000.000.000 – 223.255.255.255 – Adds to or changes the IP address for the trap
manager.
Clear – Fills the NMS IP address with zeros.
September 2001
Table 3-8, SNMP Traps
Management and Communication
, for trap format standards and special
3. Configuration
Options).
3-27