Assigning Snmp Community Names And Access Levels - Paradyne 7123 User Manual

4. Security and Logins

Assigning SNMP Community Names and Access Levels

The DSU/CSU supports the SNMP protocol and can be managed by an SNMP
manager. SNMP manager access can be limited by:
T
T
Whenever an SNMP manager attempts to access an object in the MIB, the
community name must be supplied.
Procedure
To assign SNMP community names and access types:
See
more information about General SNMP Management configuration options.
4-8
Assigning the SNMP community names that are allowed to access the
DSU/CSU's Management Information Base (MIB).
Specifying the type of access allowed for each SNMP community name.
1. Select the General SNMP Management options.
Main Menu Configuration
General SNMP Management
2. Set the following configuration options, as appropriate.
To . . .
Assign SNMP community names
Assign the type of access allowed
for the SNMP community names
3. Save your changes.
Configuring General SNMP Management
September 2001
Management and Communication
Set the configuration option . . .
Community Name 1 and Community Name 2
to a community name text, up to
255 characters in length.
Name 1 Access and Name 2 Access to Read
or Read/Write.
in Chapter 3, Configuration, for
7123-A2-GB20-00