Configuration Option Areas
The DSU/CSU arrives with configured factory default settings, which are located in
the Factory Default Configuration option area. You can find the default settings for
configuration options in the
If the factory default settings do not support your network's configuration, you can
customize the configuration options to better suit your application.
Four configuration option storage areas are available:
7123-A2-GB20-00
Configuration Option Area
Current Configuration
Customer Configuration 1
Customer Configuration 2
Default Factory Configuration
September 2001
Configuration Option Tables
Description
The currently active set of configuration options.
An alternate set of configuration options that the
customer can set up and store for future use.
Another alternate set of configuration options that the
customer can set up and store for future use.
A read-only configuration area containing the factory
default set of configuration options.
You can load and edit default factory configuration
settings, but you can only save those changes to the
Current, Customer 1, or Customer 2 configuration option
areas.
The Current, Customer 1, and Customer 2 configuration
option areas are identical to the Default Factory
Configuration until modified by the customer.
3. Configuration
on page 3-8.
3-3