Limiting Telnet Access - Paradyne 7123 User Manual

Limiting Telnet Access

Telnet access can be limited by:
T
T
T
Procedure
To limit Telnet access:
See
for more information about setting Telnet configuration options.
7123-A2-GB20-00
Disabling Telnet access completely.
Requiring a login for Telnet sessions.
Assigning an access level for Telnet sessions.
1. Select the Telnet and FTP Session options.
Main Menu Configuration
Telnet and FTP Sessions
2. Set the following configuration options, as appropriate.
To . . .
Disable Telnet access
Require a login
Assign an access level
3. Save your changes.
Configuring Telnet and/or FTP Session Support
September 2001
Management and Communication
Set the configuration option . . .
Telnet Session to Disable.
Login Required to Enable.
NOTE: User ID and password combinations must
be defined. See Creating a Login
Security and Logins .
Session Access Level to Level-2 or Level-3.
NOTE: Regardless of a user's login access level, a
user cannot operate at a level higher than the
access level specified for the Telnet session (e.g., if
a user has a Level-1 login and Level-2 telnet
access has been set, the Level-1 user can only
operate as a Level-2 user).
If you are going to allow users to configure the unit,
keep the access at Level-1.
in Chapter 3, Configuration,
4. Security and Logins
in Chapter 4,
4-5