Limiting Ftp Access - Paradyne 7123 User Manual

4. Security and Logins

Limiting FTP Access

FTP access can be limited by:
T
T
Procedure
To limit FTP access:
See
for more information about setting FTP configuration options.
4-6
Disabling FTP access completely.
Requiring a user ID and password to login.
1. Select the Telnet and FTP Session options.
Main Menu Configuration
Telnet and FTP Sessions
2. Set the following configuration options, as appropriate.
To . . .
Disable FTP
Require a login
3. Save your changes.
Configuring Telnet and/or FTP Session Support
September 2001
Management and Communication
Set the configuration option . . .
FTP Session to Disable.
Login Required to Enable.
NOTE: User ID and password combinations must
Creating a Login
be defined. See
If you want to allow users to configure the unit or
perform file transfers, including downloads, keep
the access at Level-1.
Level-1 access is required to download software to
the unit, or to upload or download configuration
files. Level-3 is sufficient for NMS access for SLV
historical information.
in Chapter 3, Configuration,
on page 4-10.
7123-A2-GB20-00