Paradyne 7123 User Manual page 94

5. Operation and Maintenance
Procedure
To initiate an FTP session:
5-24
1. Start the FTP client program on your host. For example, on a UNIX host,
type ftp, followed by the DSU/CSU's IP address.
2. If a login and password are required (see
Security and Logins ), you are prompted to enter them. If not, press Enter.
The FTP prompt appears.
The starting directory is the root directory (/). Use standard FTP commands
during the FTP session, as well as the following remote FTP commands.
Command Definition
cd directory Change the current directory on the DSU/CSU to the specified
directory .
dir [ directory ] Print a listing of the directory contents in the specified directory . If
no directory is specified, the current one is used.
get file1 [ file2 ] Copy a file from the remote directory of the DSU/CSU to the local
directory on the host (for configuration files only).
remotehelp Print the meaning of the command. If no argument is given, a list
[ command ] of all known commands is printed.
ls [ directory ]
Print an abbreviated list of the specified directory's contents. If no
directory is specified, the current one is used.
put file1 [ file2 ] Copy file1 from a local directory on the host to file 2 in the current
directory of the DSU/CSU. If file2 is not specified, the file will be
named file1 on the DSU/CSU.
recv file1 [ file 2 ] Same as a get.
send file1 [ file 2 ] Same as a put.
pwd Print the name of the current directory of the DSU/CSU.
bin Places the FTP session in binary-transfer mode.
September 2001
Creating a Login in Chapter 4,
7123-A2-GB20-00