Trap: Warmstart; Trap: Authenticationfailure - Paradyne 7123 User Manual

Trap: warmStart

This trap indicates that the DSU/CSU has been reset and has stabilized.
Table B-2.

Trap: authenticationFailure

This trap indicates that access to the DSU/CSU was unsuccessful due to lack of
authentication.
Table B-3.
7123-A2-GB20-00
warmStart Trap
Trap What It Indicates
warmStart DSU/CSU has just
reinitialized and stabilized
itself.
Variable-Binding
devLastTrapString
(devHealthAndStatus.mib)
authenticationFailure Trap
Trap What It Indicates
authenticationFailure Access to the DSU/CSU
was attempted and failed.
Variable-Binding
devLastTrapString
(devHealthAndStatus.mib)
September 2001
B. SNMP MIBs and Traps
Possible Cause
T
Reset command sent.
T
Power disruption.
String:
'Unit reset.'
Possible Cause
T
SNMP protocol message not
properly authenticated.
T
Three unsuccessful attempts
were made to enter a correct
login user ID/password
combination.
T
IP Address security is enabled
and a message was received
from the SNMP Manager
whose address was not on the
lost of approved managers.
String:
'Unauthorized access attempted.'
B-5