Logging On - Paradyne 7123 User Manual

2. User Interface and Basic Operation

Logging On

Start a session using one of the following methods:
T
T
T
When logging on, the User Interface Idle screen appears.
T
T
When the user interface has been idle, a session is automatically ended and the
screen goes blank when the unit times out. Press Enter to reactivate the interface.
Procedure
To log in when security is being enforced:
2-2
Telnet session via the Ethernet port.
Dial-in connection using an external modem.
Direct terminal connection over the COM port.
If no security was set up or security was disabled, the Main Menu screen
appears (see Main Menu
If security was set up and is enabled, you are prompted for a login. Enter your
login ID and password.
1. Type your assigned Login ID and press Enter.
2. Type your Password and press Enter.
— Valid characters – All printable ASCII characters
— Number of characters – Up to 10 characters can be entered in the Login
ID and Password fields
— Case-sensitive – Yes
An asterisk (*) appears in the password field for each character entered.
September 2001
on page 2-4). You can begin your session.
7123-A2-GB20-00