About The 7123 Snmp Dsu/Csu; System Overview - Paradyne 7123 User Manual

About the 7123 SNMP DSU/CSU

System Overview

The 7123 SNMP DSU/CSU provides an interface between the T1 digital network
and the customer premises equipment, converting signals received from the DTE
(Data Terminal Equipment) to bipolar signals that can be transmitted over T1 lines.
The 7123 SNMP DSU/CSU offers these features:
T
T
T
T
T
T
T
7123-A2-GB20-00
Auto-Sensing 10/100BaseT Port. Allows the DSU/CSU to connect directly to
an Ethernet LAN.
SNMP (Simple Network Management Protocol) Management. Provides
network management via an industry-standard SNMP management system.
ASCII Terminal Interface. Provides a menu-driven VT100-compatible
interface for configuring and managing the DSU/CSU locally or remotely by
Telnet session or External Modem.
Two Customer-Specified Configuration Storage Areas. Allows quick
access to alternate sets of configuration options.
Dual Flash Memory. Allows software upgrades while the unit is up and
running. Two software loads can be stored and implemented at the user's
discretion.
Testing Capability. Provides a variety of tests to identify and diagnose device
and network problems. Tests can be commanded from the unit's menu-driven
user interface or the OpenLane SLM system.
IP Routing Table. Shows the IP routing table for the DSU/CSU, with network
as well as host routes, the number of hops to the destination, the method by
which the route was added to the table, the interface used to get to the
destination, and how long the route has been in existence.
September 2001
1
1-1