Clearing Assignments - Paradyne 7123 User Manual

3. Configuration
Procedure

Clearing Assignments

Clearing assignments sets all time slots to Unassgn (unassigned).
3-18
1. Select the following menu selection sequence:
Main Menu Configuration
Sync Data Port Assignments or
2. Select an interface in the Assign To field. A matrix of the current cross-connect
status of all time slots on the selected interface appears.
3. Move the cursor to the next time slot that can be edited (underlined). Use the
spacebar or type in the desired time slot to display its time slot assignment.
4. Repeat Step 3 until the synchronous data port is assigned to all desired time
slots.
5. Save the configuration.
Main Menu Configuration
September 2001
Time Slot Assignment
Time Slot Assignment Clear Assignments
7123-A2-GB20-00