Entering System Information And Setting The System Clock - Paradyne 7123 User Manual

Entering System Information and Setting the System Clock

Select System Information to set up or display the general SNMP name for the
unit, its location, and a contact for the unit, as well as to set the system clock.
The following information is available for viewing. Save any entries or changes.
See
7123-A2-GB20-00
Main Menu Control
If the selection is . . . Enter the . . .
Device Name Unique name for device identification of up to 20 characters.
System Name SNMP system name; can be up to 255 characters.
System Location System's physical location; can be up to 255 characters.
System Contact Name and how to contact the system person; can be up to
255 characters.
Date Current date in the month/day/year format (mm/dd/yyyy).
Time Current time in the hours:minutes format (hh:mm).
NOTE:
To clear existing information, place the cursor in the Clear field (Tab to the
Clear field) and press Enter.
Chapter 4, Security and
September 2001
System Information
Logins, to set up and administer logins.
3. Configuration
3-7