Viewing Leds And Control Leads - Paradyne 7123 User Manual

Viewing LEDs and Control Leads

The 7123 SNMP DSU/CSU's faceplate includes LEDs (light-emitting diodes) that
provide status on the unit and its interfaces.
The Display LEDs and Control Leads screen allows you to monitor a remote unit
and is useful when troubleshooting control lead problems. The appropriate
interfaces are shown on this screen, with the appropriate status highlighted.
LEDs and control leads in an ON state are shown in inverse video.
Refresh the screen to view control lead transitions. LED and control lead
descriptions are in the sections that follow.
7123-A2-GB20-00
7123 SNMP DSU/CSU
FT1/T1
Main Menu Status
Display LEDs & Control Leads Screen
main/status/leds
Device Name: Node A
GENERAL
OK
OK
Alarm
Test
-------------------------------------------------------------------------------
ESC for previous menu
Refresh
September 2001
System Network
Display LEDs and Control Leads
DISPLAY LEDS & CONTROL LEADS
T1 DSU/CSU
NETWORK1
Sig
OOF
Alm
5. Operation and Maintenance
Port
01-17031
7123
09/09/2001 05:01
PORT-1
OK
OK
TXD
RXD
DTR
DTR
RTS RTS
MainMenu Exit
5-3