System And Test Status Messages; Self-Test Results Messages; Last System Reset Date And Time; Health And Status Messages - Paradyne 7123 User Manual

System and Test Status Messages

System and test status information is selected from the Status menu.
The following information is included on this screen:
T
T
T
T

Self-Test Results Messages

One of these self-test result messages appears in the Self-Test Results field at the
top of the System and Test Status screen.
Table 5-5.

Last System Reset Date and Time

This field indicates the last time the DSU/CSU was reset. It appears after the
Self-Test Results field at the top of the System and Test Status screen.
T
T
7123-A2-GB20-00
Main Menu Status
Self-Test Results Messages
Last System Reset Date and Time

Health and Status Messages

Test Status Messages

Self-Test Results Messages
Message What It Indicates
Failure xxxxxxxx
An internal failure occurred
(xxxxxxxx represents an
8-digit hexadecimal failure
code used by service
personnel).
Record the failure code
before resetting the unit;
otherwise, the error
information will be lost.
Passed No problems were found
during power-on or reset.
Date is in mm/dd/yyyy format (month/day/year).
Time is in mm:ss format (minutes:seconds).
September 2001
System and Test Status
What To Do
1. Record the failure code.
2. Reset the unit.
3. Contact your service
No action needed.
5. Operation and Maintenance
representative.
5-11